Precision PCB Manufacturing
Precision PCB Manufacturing for the Electronics of Tomorrow
From advanced PCB fabrication to high-reliability manufacturing, Stech PCBA delivers precision-engineered solutions built around your technical requirements, quality standards, and production goals.
- 25+
- Years in operation
- 18
- Board technologies
- 4
- Certifications held
Illustrative board — not to scale
About Stech PCBA
A precision manufacturing company that happens to work at the scale of electronics.
For 25+ years, Stech PCBA has manufactured circuit boards for engineering and procurement teams who need the same discipline in a 0.1mm trace that an aerospace shop applies to a machined part. Every board is built to a specification, not a guess.
See how we manufacture →Years manufacturing precision circuit boards.
Manufacturing Capabilities
Inside the boards we build
Pick a part of the board to see what we can build. Every figure links to the full limits on the capabilities page.
Illustrative cross-section — not to scale
Layer stack
Copper layers laminated with cores and prepreg into one board, from simple multilayers to high-layer-count backplanes and test boards.
- Layer count
- Up to 120 layers
- Board thickness
- Up to 7 mm
- Thinnest core
- 1 mil
How It's Built
From design file to shipped board
Eight stages, the same sequence for a five-piece prototype or a production run. Select a stage to see what happens there.
Step 01 / 08
Design Review
Incoming files and specifications are checked against manufacturability requirements before anything enters production.
PCB Technologies
18 board technologies, one manufacturer.
From quick-turn prototypes to probe cards — each links through to its own page with layer count, trace and space, materials and finishes.
- High Layer Count PCBVery high layer-count stack-ups for backplanes, networking and test hardware.
- HDI PCBLaser-drilled microvias and fine traces for compact boards.
- Rigid PCBTraditional rigid substrates for standard enclosures.
- Substrate-like PCB (SLP)Near-IC-substrate line widths for the most compact electronics.
- Copper Inlay PCBEmbedded solid copper for heat and high-current paths.
- Flexible PCB (FPC)Thin, bendable circuits for dynamic and space-constrained designs.
- Metal Core PCB (MCPCB)Metal-backed boards that pull heat away from power components.
- Aluminium PCBAluminium-backed boards for LED and power designs that need to shed heat.
- High-Frequency PCBControlled-impedance boards for RF and high-speed paths.
- Rigid-Flex PCBCombined rigid and flexible circuits in one assembly.
- Multilayer PCBComplex layer stacks for dense, high-reliability designs.
- High-Complexity PCBAdvanced builds for the most demanding designs.
- High-TG PCBHigh glass-transition materials for thermal stability.
- Standard PCBSingle and double-sided boards for general electronics.
- Prototype PCBFast-turn boards for design validation before production.
- ATE PCBBoards built for automated test equipment applications.
- Burn-in BoardHigh-temperature test boards that hold devices under stress during burn-in.
- Probe CardHigh-density probe card PCBs for wafer-level test.
Need the boards assembled too? See PCB Fabrication & Assembly
Quality & Engineering
Quality isn't a final check. It's the process.
Every board is manufactured under quality management systems audited to the standards below — not applied after the fact, built into the process from design review through final inspection.
ISO 9001
International standard for quality management systems.
IATF 16949
Automotive-sector quality management requirement, built on ISO 9001.
UL Certified
Independent safety certification recognized across North America.
IPC Class 2/3
Industry acceptability standards for electronic assemblies, up to high-reliability class 3.
Who We Serve
Industries
Different sectors carry different reliability and compliance requirements — automotive and medical electronics don't tolerate the same margins as consumer devices.
Why Stech PCBA
Three things that are actually true.
No vague promises — every reason here traces back to a fact you can verify.
Decades of manufacturing experience
Years of process refinement behind every board that ships, not a startup learning on your order.
A genuinely broad technology range
Standard through high-complexity, one manufacturer instead of qualifying a new vendor per board type.
Certified quality systems
ISO 9001, IATF 16949, UL and IPC Class 2/3 — audited standards, not self-declared ones.
Inside the Facility
Built around a controlled process, not a black box.
Illustrative images of each process area — not photographs of Stech's own facility. Facility photography is on the way.
Get Started
Ready to get a quote?
Board type, quantity, layers, material, files — the Request a Quote page is built for a real specification, not a contact-us box. Engineering reviews it directly.
- 25+
- Years in operation
- 18
- Board technologies
- 4
- Certifications held
Contact
Talk to engineering, not a call queue.
For general inquiries — for a specific board, use Request a Quote above so engineering has what it needs to respond.
Phone
+1 (972) 921-1173US Offices
Dallas, TX, USA13838 The Lakes Blvd, Pflugerville, TX 78660, USA
Business Hours
Monday–Friday, 24 hours